Product News: PNV-57E NOROTOS MOUNT v2

Ask about any products and the shop in general!
User avatar
net_split
Admin & Support
Posts: 286
Joined: 22 May 2015, 15:40
Location: Germoney
Contact:

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by net_split » 06 Oct 2015, 21:11

Unfortunately not. Still tinkering on the new printer.

Kebabbink

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by Kebabbink » 01 Jan 2016, 14:20

Any news on the development of the mount?

User avatar
net_split
Admin & Support
Posts: 286
Joined: 22 May 2015, 15:40
Location: Germoney
Contact:

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by net_split » 06 Jan 2016, 15:02

Still optimizing the printer. Turns out printing nylon is rather complex.
But it should be worth it in the end.

Veers57
Posts: 8
Joined: 13 Sep 2015, 21:09

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by Veers57 » 10 Feb 2016, 03:27

How has this been going?

Hoping to take my PNV-57E with me to Camp Balle near Ft Polk, LA for an Army school in April. There is an overnight field exercise and these would give me advantage over my peers. Plan on even taking my Cyclop monocular. Even if the mount isn't ready, I'll be able to use my Tanker PNV setup.

User avatar
net_split
Admin & Support
Posts: 286
Joined: 22 May 2015, 15:40
Location: Germoney
Contact:

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by net_split » 10 Feb 2016, 21:07

Printer broke down again :?

I could send you the design files though, so you can print it in the US.

Kebabbink

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by Kebabbink » 22 Feb 2016, 18:57

Very much interested in the design file. Could you mail it to me?

User avatar
net_split
Admin & Support
Posts: 286
Joined: 22 May 2015, 15:40
Location: Germoney
Contact:

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by net_split » 01 Mar 2016, 22:41

I am currently on a business trip, but I will upload the design files free for your own personal use when I am back in Germany!

User avatar
net_split
Admin & Support
Posts: 286
Joined: 22 May 2015, 15:40
Location: Germoney
Contact:

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by net_split » 12 Mar 2016, 15:20

I am back with a much more simple design, that could be very easily (cnc) milled. Damn 3d printing gives me headaches :roll:
(99% of 3d printing is done with PLA or ABS. Both lack the required strength for this application. I hoped, that I would be able to archive it with Nylon, however printing Nylon is a true nightmare...)

The red part is only a spacer, that is not necessary for most helmets. However I need it on mine to have the NV sit at a proper height. You can just leave it out and it will work fine.

Also I bought myself a broken CNC mill. If I can get that thing up and running again, I could produce them from Aluminum, which would be a much more durable.
pnv-57e_adapter.png
pnv-57e_adapter.png (162.08 KiB) Viewed 5931 times
Download the Design file here:
pnv-57e_adapter.zip
(584.24 KiB) Downloaded 242 times
Should you need it in an other format, let me know!

Veers57
Posts: 8
Joined: 13 Sep 2015, 21:09

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by Veers57 » 14 Mar 2016, 13:25

Thanks for the file.

How does the mount work?

I presume the round clamp goes around the PNV center rod. What does the upper mount to? On my two Norotos mounts, I have a dovetail adapter area where a PVS J Arm would slide into. Ended up getting a Gen 2 of the Norotos mount as well.

Once I get this printed out and mounted to my setup, I'll post some pics.

User avatar
net_split
Admin & Support
Posts: 286
Joined: 22 May 2015, 15:40
Location: Germoney
Contact:

Re: Product News: PNV-57E NOROTOS MOUNT v2

Post by net_split » 14 Mar 2016, 14:39

The file is intended for CNC machining. But I can modify it for 3d printing, just need to make some parts thicker.
I'll upload it later today and explain how it works!

Which helmet are you using by the way?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest